Back For Good Car Trim Restorer
Back For Good faded plastic car trim & bumper restorer is available in matt* and gloss* finishes
Restores and protects ANY COLOUR trim - lasting years, not four washes!
Back For Good is a hard coating that uses Everbrite coating technology & not only restores trims back to their original factory finish and feel, but also protects and prevents re-fading with its unique fade stop formulation.
We guarantee it will not crack, fade or peel!
Back For Good will not to yellow thanks to two inbuilt UV blockers and salt protection. And it won't crack or peel either as the crystal clear coating remains flexible. Back For Good won't leave a sticky or slimy residue. Once cured, it not only looks like a brand new trim has been fitted, but it feels like it, too!
Re-coating
Re-coating damaged areas is simple because Back For Good is self annealing (it blends to itself). Just wipe down the affected area and reapply for an invisible repair. Fast and simple!
- even under the bonnet!
BEFORE AFTER
Back For Good comes in a user-friendly kit with FREE applicator (solvent-resistant sponge), a pair of disposable gloves and instructions. Choose from Matt* or Gloss* versions priced:
60ml with free small applicator sponge (cars) £14.99
120ml with free small applicator sponge and lint-free cloths (vans/motorhomes) £28.48
300ml with large applicator sponge and lint-free cloths (multi-vehicles) £67.64
*The Matt finish is recommended for textured abs plastics (most bumpers, etc).
The Gloss version is for trim with a smooth/shiny finish (wiper arms, window trim, etc).
Additional packs of sponges and lint-free cloths are available, click here for details.
| Size | Coverage (single coat) |
|---|
| 60ml | 2m² |
|---|
| 120ml | 4m² |
|---|
| 300ml | 9m² |
|---|
All prices are inclusive of VAT. For delivery costs click here.
Extreme Test on Grey Trim using Back For Good
The photos below demonstrate how Back For Good performed on a grey wing mirror suffering from extreme oxidisation and fading. The two-part Wash & Coat process is simple - just wash the surface with soapy water (use a soft brush in extreme conditions), allow to dry and apply Back For Good sparingly. We recommend you wear gloves as the coating does soak into the cloths and can get on your hands. Only a very thin coat is needed. Use the lint-free cloths to work the Back For Good lightly into the surface.
Before (left): Cleaned mirror prior to coating. After (right): Back For Good applied and dried.
Rejuvenate and protect any colour of exterior trim with this simple two-part wash and coat process: